INSTALLATION
TROUBLESHOOTING
Kmbox Net Guide
Manual how to set up, update and spoof Kmbox Net to use it with DMA cheats and solve possible errors.
This guide will not work for Kmbox B Pro.
You can buy our Kmbox here — https://www.dma-cheats.com/kmbox
DOWNLOAD
Recommended Hardware
Recommended USB cable — you can use any USB 2.0 or 3.0 cable
Recommended mouse — any wire or wireless mouse
If you don't have a Second PC we recommend — Mini PC
Recommended OS — Windows 10 on both computers
Connecting Kmbox Net
-
All software setup/installation is done on the second computer that is connected to the DMA card by way of USB. DO NOT install/setup this software into the main computer in which you installed the DMA card into the motherboard's PCIe slot. Installing files onto the wrong computer may result in detection.
1. Connect the Kmbox according to the picture below
.jpg)
After you connected kmbox it should show this image on the screen
2. Run 2. WCHUSBNIC as admin on second PC (and all next steps do on second PC)
3. Select INSTALL
4. You should see a Driver Install Success!
5. Reboot second PC
6. Make sure that your main and second PCs are connected to the same local network (for example, your home Wi-Fi)
7. Open Control Panel on your second PC
8. Go to Network and Internet
9. Go to Network and Sharing Center
10. Open Change adapter settings
11. If you have done everything correctly, you will see a device with a description of
"USB 2.0 Ethernet Adapter".
If you don't see this device, disconnect and reconnect the cable from the Kmbox to the second PC.
Right-click on this device and go to Properties.
12. Make sure "Internet Protocol Version 6 (TCP/IPv6)" is disabled
13. Make sure "Internet Protocol Version 4 (TCP/IPv4)" is enabled. Click on it and go to Properties
14. Set the properties to look exactly like this:
IP address: 192.168.2.100
Subnet mask: 255.255.255.0
Leave the other fields empty
And click OK
15. Your Kmbox Net is ready to use.
Now, when you start a cheat for first time, you will need to enter the data from your Kmbox
16. If, as in my case, the cheat loader writes that Kmbox net connecting is good, then you did everything right. If the cheat doesn't see your Kmbox and doesn't start, then proceed to troubleshooting.
In order not to enter data from your Kmbox every time, go to the config section in the cheat, select any config and click save
Video Manual
Updating Kmbox Net
If your Kmbox Net firmware differs from the current one, it's recommended to update (flash) it.
This can improve performance, fix bugs, and prevent detection.
The latest version of Kmbox Net: 20240904
Date of last update: 04.09.2024
1. Connect a USB cable to your Main PC
2. Press and hold this small black button inside the Kmbox using a screwdriver or other thin object
And at the same time connect the USB cable to this connector
The Kmbox screen should turn white, and this blue diode should start flashing rapidly. If this doesn't happen, then try to hold the button again and reconnect the USB cable
3. On your Main PC, go to the folder DMA Cheats\3. Kmbox\Kmbox Net\Firmware and install the driver
4. Launch the Upgrade Tool. Click Search Device. In the information line, it should be written
"Found 1 USB devices"
5. Click Select file
6. Go to the folder DMA Cheats\3. Kmbox\Kmbox Net\Firmware
Change the type of files displayed to .BIN
7. Select the firmware file
8. And click "Program"
9. Wait a few seconds. After the end of the process, you will see a message
Firmware update is complete. Now we need to spoof Kmbox according to the guide below.
This must be done every time after updating the firmware on Kmbox Net
Spoofing Kmbox Net
1. Disconnect all cables and mouse from Kmbox
2. Connect your mouse to your Main PC as usual, without Kmbox
On your Main PC go to DMA Cheats\3. Kmbox\Kmbox Net\Firmware\Kmbox Net Spoofing\1. For Main PC folder
And run the USBLogView.exe, make the program fullscreen
3. Unplug your mouse from Main PC and plug it back in
You will see Vendor ID and Product ID of your mouse
We will need this data later, write it down somewhere in one line without a space
In my case it will look like this: 046dc077
Important! On some mice, for example on my Steelseries Rival 3 Wireless, Vendor ID and Product ID contains only numbers and looks like this: 10381830. You will fail the spoofing process on such a mouse, I recommend using any other one.
4. Connect Kmbox to your Main and Second PC
5. On the Second PC go to DMA Cheats\3. Kmbox\Kmbox Net\Firmware\Kmbox Net Spoofing\2. For Second PC folder
Run KmboxNet.exe
Enter IP, Port and UUID from your Kmbox Net
6. Check "Ping" box and click on the big button
7. A window should appear in which OK will be written at the end.
If it doesn't connect to the Kmbox:
-
Try to restart it by unplugging it from your Main PC and plug it back in
-
Run the exe as admin
8. Enter your Vendor ID and Product ID which we saved earlier in one line without a space (in my case it's 10381830)
And click VID/PID button
9. You should see such a window which means that the process was successful
10. Go back to your Main PC and open USBLogView.exe again, make the program fullscreen
11. Unplug the Kmbox from your Main PC and plug it back in
You should see the same Vendor ID and Product ID that you saw in the Step 3
If it is, then the spoofing was successful
Video Manual
Mouse Doesn't Work
If mouse which you connected through Kmbox doesn't work on Main PC:
-
Make sure that you connected Kmbox right
-
Try to connect USB cable to another port of Main PC
-
Try to use another mouse
-
Try to connect mouse to another USB port of Kmbox
Mouse Sensitivity
Change the sensitivity in game
Cheat doesn't see Kmbox
If the cheat doesn't see Kmbox at startup:
-
Make sure that your main and second PCs are connected to the same local network (for example, your home Wi-Fi)
-
Try to use this IP address in "Internet Protocol Version 4 (TCP/IPv4)" Properties: 192.168.2.189
Aimbot is not Working
If the Kmbox test was successful, but Aimbot doesn't work in the game with directcheats:
Make sure that you have started the cheat in mode with Kmbox. Do check it go to
C:\Users\*username*\Documents\directcheats.store
You will see .cfg files of your games.
If you are playing Call of Duty, open MainCOD.cfg via Notepad
Find the line "I_DONT_HAVE_KMBOX"
If you want to play with Kmbox it should be written "I_DONT_HAVE_KMBOX = ": false,
Save it and close the file.
After you launched a game and the cheat you need to enable Aimbot and set it up through menu.
Make sure that you have configured everything correctly.
Where to download?
You will receive all the files necessary to set up a DMA card, Firmware, Kmbox, Fuser and our cheats when you purchase any product on our website (even if buy only cheat subscription for 40$, you will get ALL the files for DMA devices as well).
You can also buy access to all the files for $5 — https://dmacheats.mysellix.io/product/access-to-dma-cheats-folder
Payment on the site is accepted using cryptocurrency. If you want to pay with a Binance Gift Cards, which you can buy using Credit Card, Apple Pay, PayPal — contact the Manager
